20W LED Solar Pump Solar Pond Garden Battery Lighting Filter Pump. The description of this item has been automatically translated.Very high quality 20 watt solar pump system "SIENA" with dry running protection, filter box, filter mats, mesh bag, monocrystalline solar module , 12Volt / 7Ah battery box (6/18 volt) with timer function, LED ring, module holder, and accessories (nozzle attachments, risers). Well suited for pond systems up to approx. Flow rate (18V): 1200 l / h. Water and light, the super effect day and night. Perfect combination of solar module, battery storage with 2 output voltages 6V / 18V, submersible pump and LED ring for effect lighting and very high quality module holder made of aluminum.
An effectively illuminated fountain for the garden pond or decorative lighting design for a spring stone. Can be used individually thanks to the removable light ring. Thus, the light ring can be placed on the riser pipe or a hose. Universally applicable due to a cable extension (accessory) for the light ring.
When the sun shines in summer, the solar module generates enough energy to operate the pump with light and at the same time to charge the battery. So you get an enchanting illuminated water feature in the garden pond even in the evening. In addition, it is also possible to activate the pump with light via a switch on the battery box only in the evening and thus you can enjoy this light show even in the dark for several hours. Plug-in system with high-quality collectorless pump with Protection against dry running and overload and long-lasting LED lighting.
Different fountains can be created with the included 4 riser pipes and 2 different sprinklers (3-stage fountain and water bell). Open circuit voltage: 21.68 volts. Short circuit current (Isc): 1370 mA. Dimensions: 510 x 290 x 25mm. Head (18V): 2.20 m.Submersible pump with electronic drive. Operating voltage: 18 V DC. Pump with 5 m supply line. Degree of protection: IP 68. Dimensions (L x W x H): 129 x 85 x 91 mm.
Hose connection: 13 mm or 1/2 thread. Version with 4 suction feet on the bottom. Nozzle set: 4 risers with a length of 85 mm and 2 interchangeable nozzles (3-stage fountain and water bell). Operating voltage: 12 - 24 V DC. Dimensions (D inside / outside): 15 x 15 x 20 mm.Built-in 12 V / 7 Ah Pb battery. Max connectable solar module power: 50 Wp. Output voltages: 18 VDC / max. 1.3 A and 6 VDC / max. Output 1 with timer operation.
Degree of protection: IP 44. The battery box provides energy when the sun is just not shining or at dusk or Night. The built-in battery is charged via the connected solar module. To increase the lifespan of the battery, charging is based on an effective but gentle principle.
After the final charge voltage has been reached, we also 50 min the battery is kept at full charge. This is indicated by a flashing LED. The outputs are only activated when this process is complete. The battery box has 2 outputs for the operation of different components.The battery box must not be in the blazing sun or in the water, it is built to be splashproof. Battery, 5 m cable to the solar module. The consumers are connected via sockets. Battery type: lead / gel 12 V / 7 Ah. Connectable module power: 50 Wp. Exit 1 : 18 VDC, max. 1.3 A (23.4 W), timer operation selectable pump runs every hour for approx.
Connectable components: "Napoli", "Siena" and "Milano" pond pumps. Exit 2: 6 VDC / max. 0.7 A (4.2 W). Connectable components: pond pumps "Rimini", "Palermo", underwater heater set, pond aerator "Air" and "DUO Air".
Cable length to the solar module: 50 cm + 5 m. Operating temperature range: -5 ° C to + 40 ° C. Overcharge protection: 13.8 V. Deep discharge protection: 11.8 V. Restart voltage: 12.9 V.Dimensions (L x W x H): 200 x 165 x 111 mm. Product description / technical information filter box. When the pump is running, the water flows from above through the individual filter sponges and nets with stones or filter material (nets without stones or filter material) to the pump. The filtered pond water is then transported back into the pond via the sprinklers. The filter box is for pumps with a max.
Size up Suitable for 140 x 100 x 100 (L x W x H) mm. Consisting of pond filter box with handle and lid. 3 filter sponges and 2 mesh bags without filter material. Dimensions (L x W x H): 29 x 21 x 26.5 cm.
35 cm (place filter on stones for deeper ponds). Technical data solar module: Nominal output: 20 watts Max.Current (Imp): 1120 mA Dimensions: 510 x 290 x 25mm Weight: approx. Head (18V): 2.20 m Operating voltage: 18 V DC Protection against dry running Pump with 5 m supply line Degree of protection: IP 68 Weight: 950 g Reverse polarity protected plug No electricity costs LED light ring: 6 white LEDs Operating voltage: 12 - 24 V DC Cable length: 75 cm The main highlights: Output 1 with timer operation Protection class: III Degree of protection: IP 44 Detailed product description: Technical specifications: 5 m extension cable: Protection class: III Degree of protection: IP 44 Overcharge protection: 13.8 V Restart voltage: 12.9 V.
Display: LED Weight: 2.8 kg Technic. Förderhöhe (12V - 24V): 0,8 - 2,8 m.
Förderleistung (12V - 24V): 900 - 1500 l/h. Akku LED Ring Modulhalterung versch.Solarpumpe Teichpumpe Tauchpumpe Solar Gartenpumpe. Solar Pumpenset mit Akku & LED Ring Modulhalterung. Bei vollem Akku (12V) max.
The item "20W LED Solar Pump Solar Pond Garden Battery Lighting Filter Pump" is in sale since Thursday, February 22, 2018. This item is in the category "Garden & Patio\Ponds & Water Features\Pond & Fountain Pumps". The seller is "onlinehandelahlert" and is located in Emsdetten. This item can be shipped to European Union member countries.